Language Switch

Products & ServiceHydraulic parts

Electronic Control Unit

Linde ECU Series LINC1 LINC2
Digital input 4xPull-up 12xPull-up
 Digital input 6xPull-down 12xPull-down
Analog input 6x0-5V 20x0-5V
Input frequency 3x0-10kHz 9x0-10kHz
PWM output 7xmax.2.0A 32xmax.2.0A
Low-side switch output 4xmax.0.5A 8xmax.1.0A
External power supply 1x5V 2x5V
Communication 1xCANBus 2xCANBus
Dimensions ( for reference) 147x140x50mm 230x157x58mm

Design Features

  • Redundant safety concept, with independent functional controller and safety controller
  • Pre-set configuration
  • Operating voltage: DC 8-32V
  • Reverse polarity protection
  • Short circuit protection, operating voltage overload protection, dustproof
  • Customized switch and proportional output
  • Data transmission via CAN bus
  • Comply with EU 2004/108/EC standards
  • Comply with pulse standard of vehicle electronic control system (ISO07637-2)
  • High case strength and good sealing
  • Protection grade: IP67 (EN60529)
  • Anti-salt spray, anti-hydraulic oil, anti-diesel, anti-dust, anti-ultraviolet radiation

Product Advantages

  • Centralized control using only 1 controller
  • Match with Linde electro-hydraulic components
  • Good versatility and high reliability
  • Safety performance reaches d level of DIN EN ISO 13849-1 standard
  • Comply with German Road and Vehicle Standards (STVZ0)
  • Comply with common external parts on the market
  • The controller can be customized to meet the requirements of the engine
  • Calibration and fault diagnosis can be performed through Linde’s LinDiag
  • Suitable for the system mixed with open and closed systems
Back to top

R & D

20000 +
Global R & D personnel
R & D institutions in five countries, ten regions


  • 5,000,000 units
  • 22-10000Ps
  • 200 million kilowatts
  • Application for all markets