Language Switch

Products & ServiceBus engines

WP5NG series bus engine

Product parameters

Mode Displacement
(L)
Number of valves per cylinder Rated power/speed
(kW/rpm)
Maximum torque/speed
(N.m/rpm
Min. fuel consumption on external characteristic curve
(g/kW·h)
Technical route Application
WP5NG165E51 4.98 4 121/2100 600/1300-1500 ≤188 Single point injection + DOC 7.5-8.5m city bus
7.5-8.5m m coach
WP5NG180E51 4.98 4 132/2100 650/1300-1500 ≤188
Single point injection + DOC
7.5-8.5m city bus
7.5-8.5m m coach
WP5NG200E51 4.98 4 147/2100 665/1300-1500 ≤188
Single point injection + DOC
7.5-8.5m city bus
7.5-8.5m m coach

Product advantages

  • Emission standard: Euro V.
  • Power performance: Improved output torque at low speed and maximum torque and good responsiveness during acceleration and start-up meet the power requirement of the vehicle.
  • Economy: The fuel economic zone shifts to the low speed range; squish effect is strengthened and combustion speed is increased; the intelligent ignition coil increases ignition energy, reduces load cycle variation of low-speed part, and reduces fuel consumption. If the rear axle of small speed ratio is used, fuel consumption of the vehicle will be reduced by 2-3m3/100km further.
  • Adaptability: Two alternators and the A/C can be arranged at the front end structure to meet the different user requirements.
  • Back to top

    R & D

    20000 +
    Global R & D personnel
    5+10 
    R & D institutions in five countries, ten regions

    Engines

    • 5,000,000 units
    • 22-10000Ps
    • 200 million kilowatts
    • Application for all markets