Language Switch

Products & ServiceBus engines

WP12NG series bus engine

 


Product parameters

Mode Displacement
(L)
Number of valves per cylinder Rated power/speed
(kW/rpm)
Maximum torque/speed
(N
·m/rpm)
Min. fuel consumption on external characteristic curve
(g/kW·h)
Technical route Application
WP12NG350E52 11.596 4 257/1900 1700/1200-1500 ≤186 Single point injection + DOC 18m BRT
Over 12m
luxury coach
WP12NG380E51 11.596   280/1900 1700/1200-1500 ≤186 Single point injection + DOC 18m BRT
Over 12m
luxury coach
WP12NG380E51 11.596 4 294/1900 1730/1200-1500 ≤186
Single point injection + DOC
18m BRT
Over 12m
luxury coach

Product advantages

  • Emission standard: Euro V. 
  • Power performance: The four-valve structure effectively significantly improves output torque at low speed and maximum torque, as well as responsiveness during acceleration and start-up. 
  • Economy: The rated speed is reduced to 1,900rpm, the absolute fuel consumption in bench test is reduced by 3%, ensuring a wider economic speed range; the fuel economic zone shifts to the low speed range; squish effect is strengthened and combustion speed is increased; the intelligent ignition coil increases ignition energy, reduces load cycle variation of low-speed part, and reduces fuel consumption.
  • Reliability: The new-type ECU has a good resistance against heat, vibration and electromagnetic interference, and is directly installed on the engine.
  • Back to top

    R & D

    20000 +
    Global R & D personnel
    5+10 
    R & D institutions in five countries, ten regions

    Engines

    • 5,000,000 units
    • 22-10000Ps
    • 200 million kilowatts
    • Application for all markets